Turn the pentair water softener service manual computer over, unscrew both captive screw(s) from the memory module/mini PCI/modem cover, and remove the cover.
1 memory module see Mini RSL 2 securing clips (2) file f (3 of 14) 2/28/2004 8:26:29 AM 21 Memory, Modem, and Mini PCI Card Modules: Dell Latitude X300 Service Manual.
File f (3 of 4) 2/28/2004 8:26:35 AM 59 Reserve Battery: Dell Latitude X300 Service Manual 1 speaker cables 2 speakers see Mini RSL.
Disconnect both the antenna connectors.
Notice: Handle the speakers with care to avoid damaging them.Notice: The connectors are keyed for correct insertion.Press the reserve battery into place on the bottom case.Press the cable into the connector until the line disappears and hold the cable steady while you close the ZIF connector.Configuration Displays your hardware configuration for the selected device.See your User's Guide or file f (3 of 4) 2/28/2004 8:26:25 AM 12 Dell Diagnostics: Dell Latitude X300 Service Manual Owner's Manual for contact information.The left hinge cover fits over the power button.If you feel resistance, check the connectors and realign the card.Remove the screw securing the modem to the system board, and set it aside.Continue to ground yourself periodically during this procedure.
To stop the assessment and restart the computer, press N to continue to the next file f (2 of 4) 2/28/2004 8:26:25 AM 11 Dell Diagnostics: Dell Latitude X300 Service Manual test, press Y to retest the component that failed, press.
If you do not hear the click, remove the module and reinstall.
See the documentation that came with the media base for instructions.Select the appropriate operating system and language for your computer.Computer Orientation 1 front 2 left 3 back 4 right file f (4 of 7) 2/28/2004 8:26:24 AM 6 Before You Begin: Dell Latitude X300 Service Manual Screw Identification Placemat When you are removing and replacing components, photocopy the placemat as a tool to lay.Turn the computer over and loosen the two captive screws on the modem cover, and remove the cover.See the documentation that came with your media base for instructions.As the computer boots, it detects the additional memory and automatically updates the system configuration information.