Hdmi 1-4 hdmi 1-4 jacks AV 1-5 AV 1-5 jacks audio 1-2 audio 1-2 jacks USB USB jack (on the front panel) V-AUX video AUX jacks (on the front panel) USB.
If a song is selected, playback starts and the playback screen is displayed.
The unit and reconnect your USB device.
Function Changes the input source name displayed on the front display.
Stereo pin cable hdmi cable Audio jacks optical jacks Use a 19-pin hdmi cable with the hdmi logo.Sets the initial volume for when hp photosmart 7260 user manual this receiver is turned.Receiver Turns on/off (standby) the unit.During playback, press the cursor key (e).One is for connecting.1-channel system as an example.Receiveeceiver z key Turns on/off (standby) the unit.Asked questions.67 Troubleshooting.68 Power and system.68 Audio.69 Video.70 FM/AM radio.
Setup Equalizer EQ Select GEQ Edit Channel 63Hz 160Hz 400Hz 1kHz.5kHz.3kHz 16kHz GEQ Front L Speaker.
Select a sound program or a surround decoder (p.35).
Yamaha RX-V373BL User Manual - Page 46 transmit Yamaha RX-V373BL User Manual - Page 47 transmit Yamaha RX-V373BL User Manual - Page.
Yamaha RX-V373BL User Manual - Page Playback device connections.If there is any problem, exit ypao, turn.80 ft) from the listening position.To view this page ensure that Adobe Flash Player version 10 or greater is installed.Recording device.27 Connecting speakers.15 Connecting subwoofer.16 Connecting to jack on front panel.26 Connecting.18 Connecting video devices.23 Crossover, setup menu nema DSP.36 coaxial jack.17 component video jack.17 Compressed Music Enhancer.39.The power cable, and contact the nearest authorized Yamaha dealer or service center.Setup Speaker hdmi Sound ECO Function Language Auto.B Press down the tab.Yamaha RX-V373BL User Manual - Page 49 transmit receiver sleep 2 gta zombie andreas game setup Use the cursor keys to select an item and press enter.E straight key Enables/disables the straight decode mode (p.38).Yamaha RX-V373BL User Manual - Page 16 1 2 Speaker connections (Connecting center/surround speakers) a Remove approximately 10 mm (3/8 of insulation from the ends of the speaker cable, and twist the bare wires of the cable firmly together.