Auch wenn unsere Webseite in lisa jackson nl ebook Englisch erscheint, zeigen wir Ihnen alle Preise in Ihrer Landeswährung.
The three 18V outputs are, again, wired centre-pin negative.5.1mm connectors and can handle an average of 208mA each, or a rapidshare curso guitarra clasica pdf total of 625mA, and all the outputs may be used simultaneously up to a maximum current draw of 1000mA.
If your Donner is working for you now and not creating noise issues, I would just keep using.
Not shipping to Germany?With a maximum current capability of 1000mA (one Amp youre unlikely to overload the device, as most analogue pedals take only tens of milliamps, and as the Brick includes electronic voltage regulation, the output voltage will remain stable regardless of the number of devices connected.Was this a gift?: No 11/7/2014 (4 of 4 customers found this review helpful).0 Does Its Job and Does It Well Good Value Killed A Lot Hum Buzz Long Lasting Powerful Reliable Performance Best Uses These things do their job so well.Herzlich Willkommen, Internationale Musiker!That said, what is really driving the cost of a power supply up for you is the need for 18V and isolated outputs.Was this a gift?: No (5 of 5 customers found this review helpful).0, awesome performance Awesome Price, good Value.There are fancier power supplies available if you want to mix and match pedal polarities, dial in lower voltages to experiment with battery sag or use AC-powered pedals, but for those using the common centre-negative 9V and 18V pedals, the Dunlop Brick offers robust construction.
Was this a gift?: No 6/16/2013 (6 of 7 customers found this review helpful).0, great Power Brick, good Value, best Uses.
Reliable Performance, best Uses.
Mixes of positive and negative centre-pin devices are not supported youd need individual transformer isolation and separate acer 5830tg service manual regulators to do that, which adds a lot to the price.
I dont know about you, but Im very wary of trailing power adaptor cables on stage, so Id strongly recommend that you fit a mains power socket in your pedalboard and plug the power adaptor into that.
And of course, the AC adapter and all necessary cables to connect pedals to the unit are included.The quality of regulation is good, at least from the subjective noise point of view, and having short-circuit protection is also very sensible in a device of this kind, as one Amp of current running wild during a fault condition can cause serious damage otherwise.Also, you don't necessarily need 1 output per pedal, you can still chain a few pedals off of one output, the big things you want to isolate are high current digital pedals and pedals in front of the amp should be on a separate circuit.But since battery powered effects rarely exceed 30 milliamps each, you're not likely to use anywhere near the Brick's capacity of 1000 milliamps output!As long as you take care not to plug the 18V cables into your 9V pedals when youre wiring your plugboard, everything is really straightforward.Wenn Sie bei Musicians Friend einkaufen, geben wir nur die Artikel an, die nach Deutschland ausgeliefert werden können.At least, I've never seen an isolated power supply that uses a wall wart, and it would make the isolation much harder.