Then you will want to select Wired Network.
Within the DD-WRT interface, navigate to Wireless - Basic Settings (as seen in the screenshot above).
Choose your brand of router: Setting up Port Triggering on a Comtrend Router.Thats more of a concern for corporate networks and public hotspots, however.If it doesnt, wed strongly urge you to search for your specific router model in the DD-WRT discussion forums and see if other users have experienced the same issues you have.The router comes in a flat, UFO-shaped design with internal antennas.
Finally click on Add to begin setting up the Port Triggering.
Then go to the Settings heading.
On the Port Triggering page, enter the following nfs3 hot pursuit full version values and then press Save Settings at the bottom: Port Triggering should now be set up in your Linksys.If you havent already installed it we recommend downloading the appropriate version from the DD-WRT web site and following along with our tutorial: Turn Your Home Router Into a Super-Powered Router with DD-WRT.DD-WRT wikis Router Database here to check.AP Isolation is a security setting that well leave at your discretion to enable or disable.From here you will need to move down and press A on System.Note that if you haven't used Cisco Connect at all, the default password to log in to the router's Web interface is "admin" with the username left blank.Even the shorthand in the ssid indicated this, the vap at the end of the default ssid stands for Virtual Access Point.